FAQs

• Continuous Cleaning: DryTab automatically cleans your toilet bowl by releasing cleaning agent every time you flush
• Lasts Long: DryTab is designed to last upto 500* flushes
• Economical: DryTab releases a controlled amount of cleaning agent, only at the end of every flush, making it more economical. 
• Efficient: Even if your toilet is not used for a long time, DryTab’s life is not reduced.
• Added Fragrance: With DryTab Lime, FRAGRANCE is also released with every flush.

Yes, DryTab is very effective. Many of our customers use DryTab as it fights the foul smell and dirty colour of STP water in toilets.

DryTab works well in all systems with an external flush tank. It is suitable for wall mounted flush tanks, whether it be Western or Indian.

DryTab is designed to work in all types of water.

DryTab is designed in such a way that even if it is improperly placed, it will sink to the bottom and settle in an upright position. DryTab doesn’t float or topple.

DryTab Lime contains a mechanical fragrance pump which is patented. This pump enables the fragrance to get released every time you flush.

Since DryTab releases disinfectant and soapy foam with every flush, the need to scrub the toilet is greatly minimised.

No, DryTab can not be refilled. 

The product is designed to last 500* flushes. When the water colour in the toilet bowl is a very light blue or if there is no colour, it is time for you to replace DryTab.

More water will not be used because of DryTab.

The cistern / tank will continue to remain clean since the cleaning agent is housed within the devic

No. DO NOT OPEN THE DEVICE. It is normal to hear sound when you shake the device.

Fragrance and Cleaning Agent in DryTab are designed to last upto 500* flushes.

Yes, the colour, foam and fragrance of DryTab may vary depending on the quality of water.

EazyDrops is an electronic device that automatically dispenses any liquid inside its bottle when we place our hand underneath the nozzle. It is useful for liquids such as sanitizers, liquid soaps, shampoo, moisturizer, etc.

1. Charge the Top Unit for 3 hours with USB Type - C cable before use. 2. Fix Bottle holder to the wall with screws and wall plugs provided. 3. Fill in the Glass Bottle with liquid of your choice and screw back the Pump and insert the Glass Bottle through the Bottle Holder. 4. Press on clips attached on the Top Unit to attach it with the Bottle Holder, ensure the clips are locked in place on both sides of the Bottle Holder. 5. Switch On the device with the button on the right side and keep your hand under the nozzle to dispense the liquid.

EazyDrops can dispense Shampoo, Conditioner, Sanitiser, Handwash, Body wash, Dish wash, Moisturizer, etc.

EazyDrops can be used anywhere you want: home, office, hospital, hotel, bank, restaurant and so on.

The front green LED light blinks to indicate that your device is working and has enough battery. If this LED blinks red, the device needs to be charged.

Front LED light indicates

Green blinking - working normally

Red blinking - battery less than 25%

Side LED light lights up only when charging (near the charging port)

Green - Fully charged

Green - Fully charged Red - Charging

Clean the device with clean cloth incase of any water spillage.
Make sure the sensor is clean, free from dust and dirt.

When the red indicator appears, your device has reached low battery. The device should be charged for 3 hours to be fully charged using Type C charger, the port is on the left side of the top unit.

Check whether the device is on and the LED light on the Top unit is blinking.

Check whether the dispenser bottle is empty. 

Make sure the sensor is clean, free from dust and dirt. Use a clean dry piece of cotton cloth to clean it if needed. 

If still you are facing an issue then feel free to contact our customer care.

1 x Top Unit

1 x Bottle Holder

1x Glass Bottle

2 x Screws

2 x Wall plugs

1 x Instruction manual.

We request you to send photos and unboxing videos of the damaged product / packaging within 24 hours of receiving the product to enable us to assist you further. Please send the photos and unboxing video by email to our customer care.

After you have successfully placed an order, you will receive an email with the tracking number. You can track your delivery through the tracking id sent to you via the email.

Please contact us on our customer care.
Please note that an order can be cancelled only before the product has been dispatched.

If your bank account has been debited for the purchase amount but you did not receive order confirmation email / sms, please contact us our customer care for further assistance.

Please contact our customer care for further assistance

Please send an email to sales@vaata.com stating your requirement.

It takes around 3 to 7 business days depending on your location.

At present, we are delivering only within India.

Click on this link to change password

Please drop in a mail to sales@vaata.com with your details and to get more details